What you get when you check all the boxes.
And with our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
- Features
- Specs
- Options
- Photos
Features
- PATENTED RED TECHNOLOGY: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
- ULTRACUT SERIES 6 DECK: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
- A LEVEL OF COMFORT: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
- PRODUCTIVITY: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
- REAR DISCHARGE DECK: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
- TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.
General Information
Model
Lazer Z X Kawasaki (LZX801CKA60600)
Model Code
LZX801CKA60600
Body
Frame
Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up
Rollover Protection (ROPS)
2-post foldable ROPS standard with seat belt and latch
Drivetrain
Transmission/Drive
2 Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components; 16cc pumps and 17.1 ci motors
Transmission Speed
3,750 rpm
Number of Speeds
Infinitely variable speed selection
Travel Speed
Forward - 0–11.5 mph (18.5 kmph)
Reverse - 0–6 mph (11.3 kmph)
Wheels/Tires
Front Caster - 13 x 6.5-6 smooth tread, semi-pneumatic
Drive Tires - 24 x 12-12 4-ply Turf Master®
Brakes
Parking - Lever-actuated disc
Engine
Battery
12V battery with 15 Amp alternator
Air Cleaner
Heavy duty canister air filtration system
Measurements
Length
83.1 in. (211.1 cm)
Width
72.8 in. (184.9 cm)
Weight
1,215 lb. (551.1 kg)
Mowing Width
60 in. (152.4 cm)
Mowing Height Range
1 - 5.5 in. (2.5 - 11.8 cm)
Mowing Height Adjustments
0.25 in. (0.64 cm)
Fuel Tank Capacity
12 gal. (45.4 l)
Operational
Instrumentation
Fuel Indicator - Electronic Sender
Steering
Hydraulically dampened twin levers, adjust fore and aft; adjustable dampeners (3 positions) to customize drive responsiveness; also adjustable to 2 height positions
Safety Features
Safety Package - Operator Presence Control (OPC) and drive system interlock, with safety interlock system indicators
Other
Deck Construction
10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight; floating
Spindles
No maintenance, sealed and non-greasable spindles; 7.75 in. diameter cutter housing with 1.18 in. (30 mm) diameter spindle shaft and splined blade driver
Blades
3 blades, 20.5 in. length
Blade Tip Speed
18,500 fpm
PTO
Engagement - MagStop electromagnetic 200 ft. lb. clutch with spot brake